Ceiling Exposed Fan Coil Unit
An FP-WM ceiling-mounted hydronic fan coil unit with an exposed cabinet for room cooling and heating.
FP-WM SERIES
Overview
The Ceiling Exposed Fan Coil Unit is a hydronic room terminal that mounts directly below the ceiling. Its finished enclosure remains visible, so the unit can be installed where there is no suspended ceiling or where removing ceiling panels for service would be inconvenient.
A central plant supplies chilled water for cooling or hot water for heating. The fan draws room air through the coil and returns it through the outlet louvers. In cooling mode, moisture that condenses on the coil is collected in an insulated drain pan and led to a condensate drain.
The FP-WM arrangement leaves the floor clear and is suited to retrofit projects as well as new installations with exposed services. Water and drain lines should be planned together with mounting points and access for maintenance.
PRODUCT DETAILS
Product Features
Exposed ceiling installation
The white powder-coated cabinet includes the air outlet, return-air filter and louvers. It hangs below the ceiling without a separate enclosure.
Copper tube coil with aluminium fins
Hydrophilic aluminium fins are paired with copper tubes. Select a two-, three- or four-row coil to suit the project duty and water conditions.
Three-speed airflow control
A low-noise centrifugal fan circulates room air. AC and brushless DC motor options are available, depending on the selected configuration.
Accessible service points
The removable return-air filter and accessible fan, motor and coil simplify routine inspection and cleaning without opening a suspended ceiling.
Insulated condensate pan
A one-piece insulated pan collects condensate during cooling. A suitable drain route is required at installation.
Flexible water pipe routing
DN20 or DN25 water connections and left- or right-hand pipe orientation can be selected to suit the installation. Confirm the connection arrangement before ordering.
CONFIGURATION DATA
Technical Specifications
| Item | Specification or option |
|---|---|
| Product code | FP-WM |
| Mounting | Horizontal, exposed below the ceiling |
| Water circuit | Central chilled-water or hot-water system |
| Coil | Copper tubes with hydrophilic aluminium fins; 2, 3 or 4 rows |
| Fan and motor | Centrifugal fan, three speeds; AC or brushless DC motor option |
| Water connections | DN20 or DN25; left- or right-hand orientation |
| Condensate drainage | One-piece insulated drain pan with drain connection |
| Cabinet and air side | White powder-coated casing, removable return-air filter and outlet louvers |
Confirm rated airflow, cooling and heating duty, electrical supply and cabinet dimensions for the selected unit before ordering.
WHERE IT WORKS
Applications
Use this format where a ceiling void is unavailable and a water-based terminal is needed without taking up floor space. Depending on the project, it can be paired with an air-source heat pump, an air-cooled modular unit or a boiler-based water system.
Allow clearance for the inlet, discharge and filter removal. Confirm ceiling support, water and drain routes, and any special hygiene or environmental requirements before selection.
Send Your Requirements →- Shops, offices, guest accommodation and dining halls.
- Workshops and warehouses with exposed ceilings.
- Existing buildings and temporary rooms adding hydronic heating and cooling.
- Healthcare rooms and livestock buildings, subject to project-specific hygiene and environmental requirements.
PROJECT INQUIRY
Discuss This Equipment
Tell us about your equipment requirements and installation conditions.
From cleaner air
to a better future.